Electronic Accessories ｜ZXI 6x9” 2-Way Component Speakers with Glass Fiber Cone | 120W RMS 4-Ohm

6x9” 2-Way Component Set – 120W RMS / 360W MAX – 4 Ohm
The ZXi-692C is a premium 6x9” 2-way component speaker system rated at 120W RMS and 360W MAX with a 4-ohm impedance, engineered for listeners who want strong midbass impact, clean midrange detail, and crisp, controlled highs. By separating the woofer and tweeter, this system delivers improved sound staging, clarity, and accuracy compared to traditional coaxial designs.
Component Design for Enhanced Imaging
Unlike coaxial speakers, the ZXi-692C’s true component design allows independent placement of the woofer and tweeter, creating a wider soundstage and more precise imaging. This results in vocals and instruments sounding more natural and positioned correctly across the cabin, bringing your music to life.
Powerful Midbass with Controlled Response
The 6x9” woofers are built with glass fiber curvilinear cones, rubber surrounds, and a rigid steel basket to produce tight, punchy midbass without distortion. This construction ensures durability while maintaining excellent cone control, even at higher volumes.
Crisp Highs with Adjustable Control
High frequencies are handled by 1” tweeters featuring a PEI diaphragm and neodymium magnet, delivering smooth, detailed highs without harshness. External passive crossovers are included with adjustable tweeter attenuation (+/- 3dB), allowing you to fine-tune the sound to match your vehicle acoustics and personal listening preference.
Complete Component Solution
The ZXi-692C includes woofers, tweeters, and external crossovers, providing a full component system ready to integrate with aftermarket amplifiers or upgraded factory systems. Whether you’re building a sound-quality-focused system or a powerful daily driver setup, this kit delivers flexibility and performance.
Upgrade your listening experience with the clarity, control, and output of DS18’s ZXi-692C component speaker system.
Key Features
• 6x9” 2-way component speaker system
• 120W RMS / 360W MAX power handling
• 4-ohm impedance
• Glass fiber curvilinear cone woofers for tight midbass
• Rubber surround and steel basket construction
• 1” tweeters with PEI diaphragm and neodymium magnet
• External 2-way passive crossovers included
• Adjustable tweeter attenuation (+/- 3dB)
• Complete system with woofers, tweeters, and crossovers
General Specifications
Nominal Size: 6x9” / 152 x 228mmNominal Impedance: 4 OhmsRMS Power Handling: 120 WattsMAX Power Handling: 360 WattsSensitivity (1W/1M): 90 dBFrequency Response: 35Hz – 20KHzRecommended High-Pass Crossover: 50HzNumber of Ways: 2-WaySold As: PairGrille Included: Yes
Woofer Specifications
Voice Coil Diameter: 1.25” / 30.5mmVoice Coil Former Material: KSVWinding Material: EISVCone Material: Glass FiberCone Shape: CurvilinearSurround Material: RubberBasket Material: SteelBasket Finish: Matte BlackMagnet Material: Barium FerriteMagnet Weight: 19.4 OzSpeaker Terminals: Spade
Tweeter Specifications
Nominal Diameter: 1” / 25.4mmVC Former Material: KSVWinding Material: EISVMDiaphragm Material: PEIMagnet Material: NeodymiumMagnet Weight: 13gBody Material / Color: ABS / Black
Crossover Specifications
Passive Crossover: 2-WayCrossover Point: 3.5kHzPower Handling: Up to 300WSlope: 12 dB/OctTweeter Attenuation: +/- 3dBCapacitor Type: NPCoil Type: KSVTerminal Type: Screw-OnHousing Material: ABS / AcrylicExtra Features: Tweeter Protection
Thiele & Small Parameters
Equivalent Volume (Vas): 23.7L / 0.83 ft³Excursion (One Way) Xmax: 2.7mmFree Air Resonance (Fs): 60HzMechanical Factor (Qms): 7.03Electrical Factor (Qes): 1.4Total Factor (Qts): 1.16Mechanical Mass (Mms): 19.57gMechanical Compliance (Cms): 0.35 mm/NBL Factor: 3.22Voice Coil Inductance (Le): 0.16mHCone Area (Sd): 219.04 cm²DC Resistance (Re): 3.9 Ohms
Woofer Measurements
Overall Diameter (Without Grille): 6.4 x 9.2” / 164 x 234mmOverall Depth (Without Grille): 3.6” / 92mmOverall Diameter (With Grille): 10.4 x 7.5” / 265 x 191mmOverall Depth (With Grille): 4.16” / 107mmFront Mount Baffle Cutout: 6 x 8.7” / 153 x 221mmMounting Depth: 3.2” / 82mmMotor Diameter: 4” / 100mm
Tweeter Measurements
Overall Diameter: 2.17” / 55mmOverall Depth: 1.2” / 30mmFront Mount Baffle Cutout: 1.9” / 48mmMounting Depth: 0.8” / 20mm
Crossover Measurements
Overall Length: 2.5” / 65mmOverall Depth: 5” / 128mmOverall Height: 1.4” / 35.8mm
 
Brand:ZXI-692CSKU:ZXI-692CTags:CAMPAIGN: ACTIVE, Coaxials and Components, Current, impedance (ohms)_4 ohms, magnet_barium ferrite, Mobile, PRODUCT: DS, Product_Type:Speaker, RMS_120, Series:ZXI, series_zxi, Size:6x9", size_6x9", Speaker_Type:Component_Set, Types_Components